Raise/lower cylinder hook-up – Hawk Industries Hawkjaw Sr. 100K-2GSR M100K Serial Numbers 141 to 200 User Manual

Page 15

1. Use the Raise/Lower cylinder Cap side
Bolt

(B) to connect the HawkJaw

Suspension Ring (SR) to the Raise/

Lower cylinder (C).

2. Use the Raise/Lower cylinder Cap side

Lock Nut (N) to secure the Raise/Lower

cylinder Cap side Bolt (B).

3. Connect the Hanger Swivel (HS) to the

hanging cable.

4. Connect the HawkJaw Rod side (HR)
and

Cap side (HC) hydraulic Leader

hoses

to the Raise/Lower cylinder Rod

side (RR) and Cap side (RC) hoses. The

HawkJaw Rod side (HR) Leader hose

Quick Disconnect is male.

NOTE

Make sure the rod side of the Raise/Lower
cylinder (R) connects to the hanging cable.

NOTE

Tightly connect the quick disconnects. A
loose connection causes a pressure drop in
the hydraulic fluid which heats up the fluid
and reduces component life. A loose quick
disconnect may also stop cylinder movement.

NOTE

Use only Hawk approved quick disconnects.

Part Numbers

Part Name

Part #

Male Quick Disconnect (HC, RR) 061-H26M
Female Quick Disconnect (RC, HR) 061-H26F

Installation 13

Raise/Lower Cylinder Hook-Up