Hawk Industries Hawkjaw Jr. Manual 65K-ALS Serial Numbers 4 to 9 - Manual (Page 18)

Adjust Spinner for Make Up (cont.)
Rest Position
1. Remove the Spinner Arm Pins
(P).
2. Rotate the Spinner back to the
Pullback position (R).
3. Insert the Spinner Arm Pins (P)
with retainer clips.
6. Use the rotary table to spin drill
collars larger than 5 1/2" OD.
Place the HawkJaw spinner in
the rest position.
18 Operation
R
P
Part Name Part #
Quick Pin w/Retainer (P) 061-20093-ASY
Part Numbers