Data storage function – CatEye PW-TR100 Power Unit User Manual
Page 32

32
PW-TR100 : POWER UNIT
Operation Guide
Data storage function
Data storage allows you to create data files to be saved to the PC. Data such as current speed, heart rate,
cadence, power, trip distance, and elapsed time are recorded and stored at the data recording intervals
(memory timing intervals), which are selected during regular measurement.
• When Data Storage is on, the
icon will be on (the default setting is on). Recorded data is stored in a
data file as soon as initial set-up has been performed and data is being measured.
• Lap data, HR and Cadence data recorded during data storage are all recorded on a data file.
• A maximum of 99 data files can be stored in the memory of the main unit. When the power unit is
connected to the PC, the stored data can be downloaded to the PC.
Press the MENU button to carry out the data storage, according to the following steps:
For the basic information on how to use the menu screen, refer to “Configuring main unit” on page 35.
1. Set the data recording interval for data storage
2. View and delete files when finished to manage remaining memory
3. Record and store data
Follow the steps below for data storage.
• Up to 99 data files can be stored until the remaining memory is 0%.
• When the remaining memory is at 0% while data is being recorded, the
icon will flash, alerting
full memory. Delete old data files to use more memory.
• Before recording and storing data, select an appropriate recording interval for sufficient memory
space.
See “Data storage” on page 49.
See “Checking data file” on page 47.
4. View stored data
5. Download to personal computer