CatEye PW-TR100 Power Unit - Manual (Page 19)

19
PW-TR100 : POWER UNIT
Start Guide
1 2
3 4
5
START/STOP/ENTER
LAP
START/STOP/ENTER
LAP
Basic operations
PW100 measures data when the bicycle starts moving. You can view various data by pressing the MODE-
1 and MODE-2 buttons. You can also record lap data up to 199 laps or intervals.
Main computer functions
The main screen has 5 windows which display different types of data. Pressing the MODE-1 and the
MODE-2 buttons change the displayed information, as shown in the illustration.
The displayed items of data are as follows:
• Display-1 ........ Displays “Current speed
”.
• Display-2 ........ Displays “Heart rate ” related data.
(Press MODE-1 to cycle through data shown on Display-3,4.)
• Display-3 ........ Displays “Cadence ” related data.
(Press MODE-1 to cycle through data shown on Display-2,4.)
• Display-4 ........ Displays “Power ” related data.
(Press MODE-1 to cycle through data shown on Display-2,3.)
OFF-Power: Displays the calorie consumption in kcal.
The set of data displayed cannot be switched to a different set using the
MODE-1 button.
• Display-5 ........ Displays other data.
(Use MODE-2 to cycle through this data.)
NOTE: For more information on displayed items of data, see “Measured data” on page 24.
Starting / stopping main measurement
When you begin riding, the elapsed time starts and the speed unit will flash.
The total distance, maximum speed, maximum heart rate and maximum cadence are updated indepen-
dently of starting / stopping of the main measurement.
NOTE:
To manually start and stop measurement using the START/STOP/ENTER button, see “Auto-
mode” on page 37 for instruction on turing on or off the auto-mode.
START/STOP/ENTER button