CatEye PW-TR100 Power Unit - Manual (Page 26)

26
PW-TR100 : POWER UNIT
Operation Guide
5
6
5
6
5
6
5
6
MODE- 2
MODE- 2
MODE- 2
MODE- 2
5 TM-1 Elapsed time
Indicates the elapsed time from the start of measurement to 1/10 second. When it exceeds 10 hours,
1/10 second is not displayed.
Measuring range: 0:00’00”0 to 99:59’59”
6 DST-1 Trip distance
Indicates the trip distance covered.
Measuring range: 0.00 to 9999.99 (six 9’s) km [mile]
5 Clock
Indicates the current time of day in the 24- or 12-hour system.
Measuring range: 0:00 to 23:59 [AM 1:00 to PM 12:59]
6 AVS 1 Average speed
Indicates the average speed of the trip. When the trip distance exceeds 10000 km [mile] or the elapsed
time exceeds 100 hours,
[.E] appears indicating that further measurement is impossible.
Measuring range: 0.0 to 199.9 km/h [0.0 to 125.0 mph]
5 DATE Date
Indicates the current day, month, and year.
Measuring range: 00’01.01 to 99’12.31
6 MXS Maximum speed
Indicates maximum speed achieved; recorded even while computer is manually stopped.
Measuring range: 0.0 (4.0) to 199.9 km/h [0.0 (3.0) to 125.0 mph]
5 TTM Total time
Total time is continual and cannot be reset.
Measuring range: 0:00 to 9999:59 h
6 ODO Total distance
The total distance is continually measured and cannot be reset. When it exceeds 100,000 km [mile], 1/
10 km [mile] is not displayed.
It is updated independently of starting/stopping data measurement.
Measuring range: 0.0 to 999999 (six 9’s) km [mile]
Display-5