Aastra Telecom 9516CW - Manual (Page 13)

9
SuperFlash
†
The SuperFlash feature allows either of two telephone extensions to activate the link to a
Call Waiting call. When a person at either extension presses
˚ both extensions
switch to and speak with the Call Waiting caller as shown in the diagrams below.
Calls will not be disconnected when you press
˚. If you wish to return to your first
caller press
˚ again. The 9516CW and one other Aastra SuperFlash-compatible tele-
phone extension will switch between the two callers each time you press
˚. Once
you have switched to one caller by pressing
˚, you must wait three seconds before
you can switch back to the previous caller. When you press
˚ and see a caller’s
Identification information but only hear a dial tone, it means that the caller has hung up.
To end a call, ensure you can see that call’s identification information (you may have to
press
˚), then press ®.
Note: SuperFlash and Super Call Waiting Identification only work with Aastra SuperFlash and
Super Call Waiting Identification-compatible telephones.
† You must subscribe to your telephone company for the Call Waiting with Calling Line Identification service.
Incoming caller's information
(Caller One) is displayed.
CALLER ONE
555-1234
CALLER ONE
555-1234
Extension telephone picks up
and also speaks with Caller One.
Extension
CALLER ONE
555-1234
Extension in use
>
Call Waiting tone sounds and Caller Two's
information is displayed on both extensions.
Extension
CALLER ONE
555-1234
CALLER TWO
555-5678
CALLER ONE
555-1234
CALLER TWO
555-5678 CALLER ONE
555-1234
Either telephone can press ˚
to speakwith Caller Two.
Both telephones speak to Caller Two
and see the displayed information.
CALLER ONE
555-1234
Extension
Caller Two
Either telephone can press ˚ again
to switch back to Caller One.