Sony MVC-CD500 - Manual (Page 78)

78
• If you mark an image shot in TIFF mode with a
print (DPOF) mark, only the uncompressed
(TIFF) image is printed, and the JPEG image
recorded at the same time is not printed.
• If you mark an image with a print mark, the
disc remaining space will decrease. If you
unmark the print mark, the disc remaining
space will also decrease.
• If the disc remaining space is not sufficient, you
may not be able to mark an image with a print
mark.
• Make sure to finalize the disc before having
images printed at a shop that supports the
DPOF standard (page 85).
In single-image mode
a Set the mode dial to .
b Display the image you want to
mark with
b / B .
c Press MENU.
The menu appears.
d Select [DPOF] with b / B , then
press z .
The mark is marked on the
displayed image.
e To continue and mark other
images, display the desired
image with
b / B , then press z .
To unmark the mark
Press z again in step 4 or 5. The
mark disappears.
In index (nine-image) mode
a Set the mode dial to , then
press the zoom W (index) to
display the index (nine-image)
screen.
b Press MENU.
The menu appears.
c Select [DPOF] with B , then
press z .
d Select [Select] with b / B , then
press z .
• When marking marks, you cannot
select [All In Folder].
e Select the image you want to
mark with
v / V / b / B , then press
z .
The green mark appears on the
selected image.
f Repeat step 5 to mark other
images.
101 2/9
VGA 60 min
DPOF
Exit
BACK/NEXT OK
TO NEXT MENU MOVE SELECT