Sony MVC-CD500 - Manual (Page 56)

56
a Set the mode dial to SET UP.
The SET UP screen appears.
b Select (Camera 2) with v / V
and [Bracket Step] with B / v ,
then press B .
c Select the desired bracket step
value with
v / V , then press z .
±1.0EV : Shifts the exposure value by
plus or minus 1.0EV.
±0.7EV : Shifts the exposure value by
plus or minus 0.7EV.
±0.3EV : Shifts the exposure value by
plus or minus 0.3EV.
d Set the mode dial to , P, S,
A, M or SCN.
e Press MENU.
The menu appears.
f Select [Mode] (REC Mode) with
b / B , then select [Exp Brktg]
with v / V .
g Shoot the image.
To return to normal mode
Select [Normal] in step 6.
• You cannot use the flash in this mode.
• During shooting in this mode, the images are
not displayed on the screen. Compose the
image before pressing the shutter button.
• The focus and white balance are adjusted for
the first image, and these settings are also used
for the other images.
• When the exposure is manually adjusted
(page 51), the adjusted value is used for the
center value.
• The recording interval is approximately
0.5 second.
• You cannot select a shutter speed of
1/25 second or slower.
• If the subject is too bright or too dark, you may
be unable to shoot properly with the selected
bracket step value.
2