Sony MVC-CD500 - Manual (Page 51)

51
Adv
a
nced
st
ill
i
m
age
sh
oot
in
g
a Set the mode dial to P, S, A, M,
SCN, or
.
b Press FOCUS to switch to
focus preset.
Each time you press FOCUS, the
setting changes in the following order.
Focus preset
Y
AF range finder frame select
The focus is fixed and the 9 (manual
focus) indicator appears.
c Turn the jog dial to select the
desired focus setting.
You can select from the following
distance settings: (Units: m)
0.1, 0.2, 0.3, 0.5, 0.8, 1.0, 1.5, 2.0, 3.0,
5.0, 7.0, 10, 15, and
∞ (infinity)
To reactivate auto focusing
Press FOCUS again so that the focus setting
information disappears.
• Focus setting information is approximate, and
should be used as a reference.
• If you point the lens up or down, the error will
increase.
• When you select 0.1 m (4 inches) with the
zoom set to the T side, you may not get a clear
focus. In such cases, the focus setting
information flashes. Press the zoom W button
until the indicator stops flashing.
• The focus preset does not work properly when
attaching a conversion lens (not supplied).
Adjusting the
exposure
— EV adjustment
Mode dial: P/S/A/SCN/
This lets you adjust the exposure value
which is set by automatic adjustment. You
can select values ranging from +2.0EV to
–2.0EV in steps of 1/3EV.
Mode dial
Jog dial
DISPLAY/LCD BACK LIGHT ON/OFF