Using the self-timer, Selecting a flash mode, Using the self-timer selecting a flash mode – Sony MVC-CD500 User Manual
Page 27: Timer lamp

27
S
hoo
ting st
ill
im
ages
Using the self-timer
,
Turn the mode dial to
, and
press
V
(
) on the control
button.
The
(self-timer) indicator appears on the
LCD screen.
•
If the menu is currently displayed, press MENU
first so that the menu disappears.
•
You can also carry out this operation when the
mode dial is set to P, S, A, M, SCN or
.
,
Center the subject in the frame,
and press the shutter button
fully down.
The self-timer lamp (page 9) flashes and a
beep sounds after you press the shutter
button until the shutter operates
(approximately 10 seconds).
To cancel the self-timer in the middle
of the operation
Press V (
) on the control button again.
The
indicator disappears from the LCD
screen.
•
If you press the shutter button while standing in
front of the camera, the focus and the exposure
may not be correctly set.
5.0M
101
96
M AF
60
min
1
2
F2.8
0EV
30
5.0M
FINE
101
96
M AF
60
min
Selecting a flash mode
,
Set the mode dial to
, and
press
v
( ) on the control
button repeatedly to select a
flash mode.
Each time you press
v
( ), the indicator
changes as follows.
5.0M
101
96
M AF
60
min