Acer Altos G900 - Manual (Page 244)

Appendix E: Codes and error messages 228
0B60: DIMM bank 1 has been
disabled Memory error, memory bank
1 failed
0B61: DIMM bank 2 has been
disabled Memory error, memory bank
2 failed
0B62: DIMM bank 3 has been
disabled Memory error, memory bank
3 failed
0B6F: DIMM bank with error is
enabled An error detected in all the
memory
0B70: The error occurred during
temperature sensor reading Error while detecting a
temperature failure.
0B71: System temperature out of
the range Temperature error detected.
0B74: The error occurred during
voltage sensor reading Error while detecting voltage
0B75: System voltage out of the
range System voltage error
0B7C: The error occurred during
redundant power module
confirmation The error occurred while
retrieving the power
information.
0B80: BMC Memory Test Failed BMC device (chip) failed
0B81: BMC Firmware Code Area
CRC check failed BMC device (chip) failed
0B82: BMC core Hardware failure BMC device (chip) failed
0B83: BMC IBF or OBF check failed Access to BMC address failed
0B90: BMC Platform Information
Area corrupted. BMC device (chip) failed
0B91: BMC update firmware
corrupted. BMC device (chip) failed
Code Error Message Failure Description
AA G900 ug - EN.book Page 228 Wednesday, September 25, 2002 5:23 PM