Acer Altos G900 - Manual (Page 159)

143
Exit
The Exit menu displays the various options to quit from the BIOS setup.
Highlight any of the exit options then press Enter.
Parameter Description
Exit Saving
Changes Saves changes made and close the BIOS setup.
Exit Discarding
Changes Discards changes made and close the BIOS setup.
Load Setup
Defaults Loads the factory-default settings for all BIOS setup
parameters.
Load Custom
Defaults Loads the user-default settings for all BIOS parameters.
When system CMOS fails, BIOS will use this customized
set of parameter settings; otherwise the factory-default
settings will be used.
Note: This parameter is only available when you have
saved a set of parameter settings as Custom Defaults.
Save Custom
Defaults Saves currents settings as Custom Defaults.
Discard
Changes Discards all changes made to the BIOS setup and loads
previous configuration settings.
Save Changes Saves all changes made to the BIOS setup.
AA G900 ug - EN.book Page 143 Wednesday, September 25, 2002 5:23 PM