Acer Altos G900 - Manual (Page 197)

181
If you want the alert to be broadcast to an entire subnet, enter the
IP address for the subnet.
9 From the Options menu, choose Configure Event Actions.
10 In the BMC LAN Alerting Actions window, move the events that
you want to generate an alert to the Enabled column and move all
other events to the disabled column using the following buttons:
11 Click Save to save the changes.
12 Click Close to return to the BMC LAN Configuration window.
13 To send a test alert to verify that you have correctly configured
BMC LAN alerts, from the Options menu, choose Send Alert.
14 Click Save to save the changes.
15 Click Close to return to the PEM window.
Managing the server remotely
You can set up the server so that you can connect to it from a remote
client system to perform management tasks. You can make the
connection over a LAN or by using a modem or direct serial cable to
the Emergency Management Port (EMP). Instructions for setting up
the server for remote LAN and serial/modem access are given below.
Setting up remote LAN access
To configure remote LAN access:
1 From the SSU Main window, choose Platform Event Manager
(PEM).
• >> Moves all events from the enabled list to the
disabled list.
• > Moves the selected event from the enabled list to
the disabled list.
• < Moves the selected event from the disabled list to
the enabled list.
• << Moves all events from the disabled list to the
enabled list.
AA G900 ug - EN.book Page 181 Wednesday, September 25, 2002 5:23 PM