HID OMNIKEY 2061 User Manual - Manual (Page 8)

2061-905_A.1 OMNIKEY 2061 Bluetooth Reader
User Manual, Firmware V1.27
4.2.2 Reader Installation
Install the OMNIKEY 2061 Bluetooth reader with the Installation dialog.
Note: Connect the reader using the USB cable and switch on.
Clicking Start pairs the reader and installs the Bluetooth device driver. After finishing the
installation process the reader is ready to use.
4.2.3 Installation Properties
The Installation Properties dialog configures the installation behaviour of the reader.
The default option, Accept Bluetooth Pairing from any host indicates that the reader accepts
pairing requests from computers which are currently not paired with the reader.
If the option Accept Bluetooth pairing from paired host only is set, it is impossible to pair the
reader with new computers.
Define the reader a friendly name using the friendly name field. The friendly name displays in the
Bluetooth Devices dialog of the Bluetooth stack currently in use.
Page 8 of 17 March 24, 2010
© 2010 HID Global Corporation. All rights reserved.