2 operation, 3 getting started, 1 software installation – HID OMNIKEY 2061 User Manual User Manual
Page 4: 2 battery charging, 3 reader setup, Operation, Getting started, 2operation, 3getting started
2061-905_A.1
OMNIKEY 2061 Bluetooth Reader
User Manual, Firmware V1.27
2
Operation
The following describes the OMNIKEY 2061 Bluetooth reader operation.
3
Getting Started
3.1
Software Installation
Insert the software Installation CD. Click Install Bluetooth Reader Configuration. For new
software versions, go to http://www.hidglobal.com/omnikey.
3.2
Battery Charging
Ensure the battery is fully charged before use. For a discharged battery, it takes approximately
four hours to charge.
To charge the battery, connect the OMNIKEY 2061 Bluetooth reader to a computer through the
enclosed USB cable.
3.3
Reader Setup
Define a common name for the reader before installation. See 4.2.3 Installation Properties, page 8
for details.
1. Connect the reader to the computer using the enclosed USB cable.
2. Switch on the reader by pressing the Power button.
3. Start
the
Bluetooth Reader Configuration Software. See Section 4 Bluetooth
Configuration Software, page 6 for additional details.
Click Start > Programs > OMNIKEY > Bluetooth Reader Configuration.
4. From
the
Reader menu, click Select Reader…
Page 4 of 17
March 24, 2010
© 2010 HID Global Corporation. All rights reserved.