HID DTC1000/4000 User Guide - Manual (Page 52)

© 2012 HID Global Corporation All rights reserved
DTC1000/DTC1000M/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.5)
52
Using the Advanced Settings tab
Setting Option
Erase Heat Offset Adjust the Erase temperature for the rewriteable cards as
needed.

Increase the Current Setting to cause more heat to
be used in the erasing process.
OR

Decrease the Current Setting to cause less heat to be
used in the erasing process.
(Note: Erase Heat Offset provides user ability to control
the Printhead heat level when the Erase Operation is
performed. Appropriate heat levels should be applied for
the proper erase process. This setting should be adjusted
for proper erasure.)
Write Heat Offset Adjust the Write temperature for the rewriteable cards as
needed.

Increase the Current Setting to cause more heat to
be used in the printing process of a rewritable card.
OR

Decrease the Current Setting to cause less heat to be
used in the printing process of a rewritable card.
(Note: Write Heat Offset provides user ability to control
the Printhead heat level when the Write Operation is
performed. Appropriate heat levels should be applied for
the proper writing process.)