Spektrum DX6i - Manual (Page 48)

48 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
TIMER
The DX6i features an on screen timer with two programming options:
DOwN-TIMER:
Down Timer - The countdown timer allows a preset time in ten-second intervals up to 59 minutes and 50 seconds
to be programmed, and when that time expires, a beeper will sound five (5) beeps every five (5) seconds.
UP-TIMER:
Up Timer - The up timer function is a simple count-up timer that displays minutes and seconds up to 59
minutes and 59 seconds. The start time can be programmed. In most cases the default start setting of 00:00 is
recommended.
When the DOWN-TIMER or UP-TIMER function is selected, the timer will be displayed on the main screen. The
following buttons are used in conjunction to operate the timer function:
Trainer Timer button- when programmed Used to stop start and reset the timer.
Throttle Cut button- when programmed Used to start stop and reset the timer.
Note: To reset the timer press and hold the assigned timer switch (throttle cut or trainer) for more
than 3 seconds.
TO SElECT ThE TIMER fUNCTION
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen
release the roller.
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST then press the roller.
Reduce photo to 13.5%
SETUP LIST
MODEL TYPE
Main