Spektrum DX6i - Manual (Page 102)

102 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
COPy/RESET
The COPY function allows the current model memory that is being used to be transferred to any of the other 9
available model memories. This is useful when experimenting with different model setups.
The Model Reset function allows the model memory of the current model to be reset to the factory default setting.
TO ENTER ThE COPy/RESET fUNCTION
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen
release the roller.
Reduce photo to 13.5%
SETUP LIST
CONTRAST
COPY/RESET 12
ADJUST LIST
Main
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST,
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST, then pressing the roller.
SETUP lIST SCREEN
Rotate the roller to highlight COPY/RESET then press the roller to access the COPY/RESET function.
Reduce photo to 13.5%
COPY
MODEL 1 BLADE400
COPY TO 1
SURE? NO/ YES
List