Spektrum DX6i - Manual (Page 35)

35 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
MODEl NAME
The Model Name function is used to input and assign the model’s name to a specific memory, allowing easy
identification of each model’s program. Each model’s name is displayed on the main screen when that model is
selected. Up to eight characters that include numbers and letters are available.
TO ENTER ThE MODEl NAME fUNCTION
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen
release the roller.
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST then press the roller.
MODEL TYPE appears on the lower section of the screen.
Reduce photo to 13.5%
SETUP LIST
MODEL TYPE
1
Main
Rotate the roller to highlight MODEL NAME then press the roller to access the MODEL NAME function.
Reduce photo to 13.5%
SETUP LIST
MODEL TYPE
MODEL NAME 2
MONITOR
Main