Servo installation – Spektrum DX6i User Manual

Page 16

SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE

SERvO INSTAllATION

In gas- and glow-powered aircraft where vibration is present, the servos should be mounted using the supplied

rubber grommets and bushings. Do not over-tighten the mounting screws. The diagram will assist you in properly

mounting the grommets and bushings. In electric and non-powered aircraft, there are many acceptable methods

for mounting the servo, including servo tape and even glue. See the information included with your aircraft for the

recommendation for installing servo(s) in your aircraft.

Servo Lead w/Connector

Servo Arm Retaining Screw

Servo Arm/Horn

Servo Output Shaft

Servo Eyelet

Rubber Grommets

Servo Mounting Flange

Servo Case

Servo Mounting Flange

Rubber Grommets