Spektrum DX6i - Manual (Page 13)

13 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
CONTROl STICK lENGTh ADjUSTMENT
The DX6i allows you to adjust the control stick’s length. Use the 2mm Allen wrench to loosen the setscrew. Turn
the wrench counterclockwise to loosen the screw. Then, turn the stick clockwise to shorten or counterclockwise to
lengthen. After the control stick length has been adjusted to suit your flying style, tighten the 2mm setscrew.
LOOSEN
TIGHTEN
SETSCREW
ADvANCED DIGITAl TRIMS
The DX6i employs digital trim levers on aileron, elevator, throttle, and rudder. The ADT (Advanced Digital Trim)
feature is designed to automatically store the selected trim values for each model. When a different model is
selected, the previously stored trim positions for that model are automatically returned to their previous settings.
Visual trim positions are displayed on the main screen. The trims feature dual speed scrolling. Holding the trim
lever for an extended time will cause the trim rate of change to increase.
Reduce photo to 13.5%
MUSTANG
5.0V
MDL6
DN06:00
Throttle Trim Elevator Trim
Rudder Trim Aileron Trim