Pitc cur – Spektrum DX6i User Manual
Page 122

122
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Press the roller to access the Pitch Curve function.
Reduce photo to 13.5%
PITC CUR
NORM + POS 3
STUNT
HOLD 50.0%
List
Rotate the roller to highlight the desired pitch curve that you wish to adjust.
NORM- Normal
STUNT- Stunt mode
HOLD- Hold
Press the roller to access the selected pitch curve.
Rotate the roller to select the pitch curve position that you wish to adjust. Note the graph. The vertical line
represents the selected position that you have chosen. Position options are:
L=
Low throttle stick position
2=
25% stick position
3=
50% stick position
4=
75% stick position
H=
Full stick position
When selected press the roller to access the pitch value.
Reduce photo to 13.5%
PITC CUR
NORM + POS 3
STUNT
HOLD 50.0%
List
Rotate the roller to adjust the pitch value at the select stick position.
After the desired value is programmed press the roller to deselect the value.
Repeat this step for all stick positions and all flight modes.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE ADjUST lIST SCREEN
Rotate the roller to highlight LIST then press the roller.