Allied Telesis AT-S63 - Manual (Page 57)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 57
The System page is displayed with the General tab selected by default,
as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Mgmt. Protocols option.
The Mgmt. Protocols page is displayed with the Server-based
Authentication tab selected by default, as shown in Figure 177 on page
432.
3. Select the Enhanced Stacking tab.
The Enhanced Stacking tab is shown in Figure 11.
Figure 11. Enhanced Stacking Tab (Configuration)
4. Click the desired enhanced stacking status for the switch. The default
is Slave.
5. Click Apply.
The new enhanced stacking status is immediately activated on the
switch.
6. From the Configuration menu, select the Save Config option to
permanently save your changes. (This option is not displayed if there
are no changes to save.)