Allied Telesis AT-S63 - Manual (Page 145)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 145
The Event log tab is shown in Figure 41.
Figure 41. Event Log Tab (Monitoring)
3. In the Display Filter Settings section, for Log Location, click one of the
following:
Temporary (Memory)
Displays the events stored in temporary memory. This selection stores
approximately 4,000 events. If the switch has been running for some
time without a reset or power cycle, select Temporary. This is the
default.
Permanent (NVS)
Displays events stored in nonvolatile memory, which stores no more
than 2,000 events. If the switch was recently reset or power cycled and
you want to view the events that occurred prior to the reset, select
Permanent.