Allied Telesis AT-S63 - Manual (Page 169)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 169
Displaying the Classifiers
To display the classifiers, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
Note
You can access the Classifiers tab either through the Network
Security menu option or through the Services menu option. This
procedure uses the path through the Services menu option.
2. From the Monitoring menu, select Services.
The Services menu is displayed with the CoS tab selected by default,
as shown in Figure 62 on page 188.
3. Select the Classifiers tab.
The Classifiers tab is shown in Figure 52.
Figure 52. Classifier Tab (Monitoring)
The Classifier tab displays a table of the currently configured
classifiers that contains the following columns of information:
ID
The ID number of the classifier.