Allied Telesis AT-S63 - Manual (Page 143)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 143
The Event log tab is shown in Figure 40.
Figure 40. Event Log Tab (Configuration)
3. In the Log Settings section, for the Status, click Enabled to enable the
event logs, or Disabled to disable the event logs.
The event log feature is enabled by default.
4. Click Apply to activate the settings on the switch.
If you enabled the logs, the switch immediately begins to add events to
the logs and send events to defined syslog servers.
5. Select the General tab.