Allied Telesis AT-S63 - Manual (Page 199)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 199
4. Click Create.
The Create Traffic Class page is shown in Figure 71.
Figure 71. Create Traffic Class Page
5. Configure the following parameters:
ID
Specifies the ID number for this traffic class. The range is 0 to 1023.
Exceed Action
Specifies the action to be taken if the traffic of the traffic class exceeds
the maximum bandwidth specified by the Max Bandwidth parameter.
The possible options are drop and remark.
DSCP
Specifies a replacement value to write into the DSCP (TOS) field of the
packets. The range is 0 to 63.
Burst Size
Specifies the size of a token bucket for the traffic class. The range is 4
to 512 Kbps. You must also specify the Max Bandwidth.
Remark Priority
Replaces the user priority value in the packets with the new value
specified in the Priority parameter.
Description
Specifies the traffic class description. A description can be up to 15
alphanumeric characters, including spaces.