Allied Telesis ALLIEDVIEW-UM 1.6 - Manual (Page 68)

Allied Telesis AlliedView-UM 1.6
User's Guide
PN 613-000381 Rev B
Page 68 of 129
10.1 CREATING A CONFIGURATION FILE UPDATE PROFILE
Update Options
1. Upload Options - Choose one of the following options:
ƒ Upload - Uploads the Configuration file only.
ƒ Upload and set - Uploads and sets the configuration file as the Configuration to be used by the
device.
2. File Deletion Options
ƒ Delete old configuration files if memory space is insufficient checkbox - If the devices to
be upgraded have limited memory space (e.g. routers), there might be a need to delete the existing
Configuration files in order to accommodate the new configuration file. If a Configuration file cannot
be downloaded due to space limitations and this option is checked, AlliedView-UM will delete any
Configuration files residing in the device except for the currently set Configuration file. If
unchecked, and there is not enough space to accommodate the new Configuration file,
AlliedView-UM will fail the operation.
ƒ Delete currently used configuration file if memory space is insufficient checkbox - This
option will only be enabled if the above option is checked. Otherwise, it will be grayed out. When
this option is checked, AlliedView-UM will also delete the currently set Configuration file if there is
still insufficient space in the device after deleting the other configuration files.
3. Reboot device after updating checkbox - If the “Upload and set” is chosen for the Upload Option,
this checkbox will be enabled. When checked, AlliedView-UM will reboot the device after performing the
update.
NOTE:
All elements defined in Upload Options panel are disregarded for the AT-8000 family, AT-8300GB family, AT-9000 family,
AT-9410GB and AT-9700 families.
NOTE:
All elements defined in Upload Options panel except "Upload" and "Upload and set" are disregarded for the AT-8400 family,
AT-8500 and AT-9400 families. All other update options apply only to devices that use AlliedWare™ management software.
During the Configuration File Update operation, AlliedView-UM will ignore the options that are not applicable.