Allied Telesis ALLIEDVIEW-UM 1.6 - Manual (Page 44)

Allied Telesis AlliedView-UM 1.6
User's Guide
PN 613-000381 Rev B
Page 44 of 129
1. License List Filename - Specify the license key list to use for the release. After choosing the License List
File, the release file to be used will be displayed in the Release Filename field.
2. Release Filename - This is a read-only field that displays the filename of the software release file that
will be installed on the target device(s).
3. Upload Options - Choose one of the following options:
ƒ Upload - Uploads the release file only.
ƒ Upload and enable - Uploads and enables the release file only.
ƒ Upload and set as temporary - Uploads, enables, and sets the release file as the temporary release
file.
ƒ Upload and set as preferred - Uploads, enables and sets the release file as the preferred release
file.
4. File Deletion Options
ƒ Delete old release files if memory space is insufficient checkbox - If the devices to be upgraded
have limited memory space (e.g. routers), there might be a need to delete the existing release files
in order to accommodate the new release file. If a release file cannot be downloaded due to space
limitations and this option is checked, AlliedView-UM will delete any release files residing in the
device except for the currently installed release. If unchecked, and there is not enough space to
accommodate the new release file, AlliedView-UM will fail the operation.
ƒ Delete currently installed release file if memory space is insufficient checkbox -This option will
only be enabled if the above option is checked. Otherwise, it will be grayed out. When this option is
checked, AlliedView-UM will also delete the currently installed release file if there is still insufficient
space in the device after deleting the other release files.
5. Reboot device after updating checkbox - If "Upload and set as temporary" or "Upload and set as
preferred" is chosen as the Upload Option, this checkbox will be enabled. When checked, AlliedView-UM
will reboot the device after a performing the software upgrade.