Allied Telesis ALLIEDVIEW-UM 1.6 - Manual (Page 129)

Allied Telesis AlliedView-UM 1.6
User's Guide
PN 613-000381 Rev B Page 129 of 129
20 OPTIONS
The Options menu provides functions for customizing the appearance and behavior of the application.
20.1 VIEW SETTINGS
The general appearance of the Device Family tree can be modified via the View Settings.
By default, the Device Family Tree only displays the IP Addresses of the device definitions. By selecting
the Options->Show System Name option, the Device Family Tree will also display the System
Names of the device definitions in addition to the IP Addresses.
Also, the entries within a Device Group in the Device Family Tree are sorted by their IP Addresses by
default. By selecting the Options->Sort By System Name option, the entries will be displayed
according to their System Name. Note that it is only possible to select this option when the Show System
Name option is enabled.
20.2 THREAD SETTINGS
This dialog box allows you to fine tune the performance and resource usage of AlliedView-UM. The No.
of Threads field controls the number of active device connections that AlliedView-UM will try to
establish during an Operation Profile and Import/Update Operation execution. For instance, if this value
is set to 10 then AlliedView-UM will limit the active connections to only 10 sessions. This allows
AlliedView-UM to effectively run on environments with low network bandwidth. The No. of Threads
field can be set from 1 up to 100.
---- End of document ----