Allied Telesis ALLIEDVIEW-UM 1.6 - Manual (Page 11)

Allied Telesis AlliedView-UM 1.6
User's Guide
PN 613-000381 Rev B
Page 11 of 129
11. Click on the button. If the IP Address, Login Name, Password, and SNMP Read
Community that you specified are correct, then the Device Family, Device Model Serial Number,
System Name, System Description and Configuration File fields should now be set. If an error
occurs, please re-check the values you entered in steps (6) to (9).
12. Finally, click on the button to add the device.
13. Your new device should now be added. If you check the Device Families pane, you should see the
IP Address of your device under the group called, "Test Group".