Allied Telesis AT-MCF2012LC/1 - Manual (Page 45)

AT-MCF2012LC and AT-MCF2012LC/1 Media Converter Modules Installation Guide
45
Fiber Optic
Cabling
The fiber optic ports on the AT-MCF2012LC and
AT-MCF2012LC/1 media converters have duplex LC
connectors.
Table 8 lists the cable requirements for the fiber optic ports
on the AT-MCF2012LC module. (For the optical
specifications, refer to “100Base-FX Fiber Optic Port
Specifications” on page 63.)
Table 9 lists the cable specifications for the fiber optic ports
on the AT-MCF2012LC/1 module. (For the optical
specifications, refer to “100Base-FX Fiber Optic Port
Specifications” on page 63.)
Note
The fiber optic ports have a fixed speed of 100 Mbps
and can operate in either half or full-duplex mode. The
default setting is full-duplex mode. To change the
duplex mode requires the optional management
module for the chassis.
Note
The maximum operating distances of the fiber optic
ports assume full-duplex mode operation. The
distance will be significantly less for a fiber optic port
operating in half-duplex mode.
Table 8. AT-MCF2012LC Fiber Optic Cable
Cable Type
Maximum
Operating
Distance
50/125 µm or 62.5/125 µm (core/
cladding) multimode fiber optic
cable 2 km (1.24 mi.)
Table 9. AT-MCF2012LC/1 Fiber Optic Cable
Cable Type
Maximum
Operating
Distance
9/125 µm single-mode fiber optic
cable 20 km (12.4 mi.)