Allied Telesis AT-MCF2012LC/1 - Manual (Page 39)

AT-MCF2012LC and AT-MCF2012LC/1 Media Converter Modules Installation Guide
39
ˆ During normal network operations, a media converter
channel can operate in any of the three operating
modes. For an explanation of the modes, refer to
“Channel Operating Modes” on page 31.
ˆ The default setting for a twisted pair port on the media
converter module is Auto-Negotiation and auto-MDI/
MDI-X.
ˆ The default duplex mode setting for a fiber optic port is
full-duplex.
ˆ Changing the settings of a port on the media converter
module requires the optional management module.
ˆ There are no adjustable switches on the circuit boards
of the AT-MCF2012LC and AT-MCF2012LC/1 media
converter modules.