Allied Telesis AT-MCF2012LC/1 - Manual (Page 17)

AT-MCF2012LC and AT-MCF2012LC/1 Media Converter Modules Installation Guide
17
ˆ 2 km (1.24 mi.) maximum operating distance using
50/125 µm or 62.5/125 µm (core/cladding) multimode
fiber optic cable for the fiber optic ports on the
AT-MCF2012LC module
ˆ 20 km (12.4 mi.) maximum operating distance using
9/125 µm single-mode fiber optic cable for the fiber optic
ports on the AT-MCF2012LC/1 module
ˆ Link Test, MissingLink
™
, and Smart MissingLink
channel operating modes
ˆ Store and forward packet processing with cyclic
redundancy check (CRC)
ˆ Hot swapping support so that the module can be
installed while the chassis is powered on.
Note
The maximum operating distances of the fiber optic
ports assume full-duplex operation. A fiber optic port
operating in half-duplex mode will have a maximum
operating distance that is significantly less.
Note
The modules must be installed in an AT-MCF2000
product line chassis, such as the AT-MCF2000
chassis. For information on the availability of other
chassis models in the AT-MCF2000 product line,
contact your Allied Telesis sale representative or visit
our web site.