Allied Telesis AT-9448Ts/XP - Manual (Page 27)

AT-9400 Stack Installation Guide
27
Compact Flash Card Slot
The compact flash card slot is used to store configuration files and AT-S63
Management Software image files on a compact flash card. A compact
flash memory card can make it easier for you to upgrade the files on a
switch or transfer files between AT-9400 Switches.
Figure 6 Compact Flash Card Slot
Note
A flash memory card is not required for normal operations of the
switch.
Note
In a stack the only active compact flash card slot is on the master
switch. The slots on the member switches are deactivated and are
not accessible.
The AT-9400 Switches support only the AT-CF128A 128MB compact flash
card from Allied Telesis. Contact your Allied Telesis sales representative
for more information.
To insert a compact flash card, position it so that the manufacturer’s brand
label is facing up and press it into the slot until the button marked “Eject”
pops out.
To remove the compact flash card, press the button marked “Eject” until it
is pressed in completely and then remove the compact flash card.
For information on how to transfer files to and from a flash memory card,
refer to the AT-S63 Stack Command Line Interface User’s Guides.
463
AT-9408LC/S
COMPACT FLASH
EJECT
TER
P