Allied Telesis AT-MCF2000 - Manual (Page 41)

AT-MCF2000 Multi-channel Media Converter Chassis Installation Guide
41
3. Lower the power cord retaining clip to secure the power
cord to the chassis and prevent it from being
inadvertently disconnected from the unit.
Figure 19. Positioning the Power Cord Retaining Clip
4. Power on the AT-MCF2000AC module and the media
converter chassis by setting the power switch to ON.
5. If the unit has a second power supply, repeat this
procedure.
Note
If you installed two power supplies, Allied Telesis
recommends connecting the two power cords to
outlets on separate power supply circuits to increase
the protection to your media converter from a failure of
a power circuit.
This completes the installation procedure. For instructions
on how to verify the operation of the ports on a media
converter module, refer to the Installation Guide that ships
with the module.
1117-a
AT-MCF2KPNL
3
NORM AL FAULT
STATU S PSU
FAN
M
A