Allied Telesis AT-MCF2000 - Manual (Page 28)

Chapter 2: Installation
28
Installing the AT-MCF2000AC Power Supply Module
This procedure explains how to install the AT-MCF2000AC
Power Supply Module.
Caution
The chassis must have two power supply modules or
one power supply module and one fan module to
maintain adequate airflow and cooling of the media
converter modules. For further information, refer to
“Power Supply Module and Fan Module Slots” on
page 19.
To install the AT-MCF2000AC Power Supply Module,
perform the following procedure:
1. Remove the power supply module from the shipping
package.
Note
Store the packaging material in a safe location. You
must use the original shipping material if you need to
return the unit to Allied Telesis.
2. Verify that the following items are included in the
shipping container.
ˆ One AT-MCF2000AC Power Supply Module
ˆ Four regional AC power supply cords
ˆ One power cord retaining clip
ˆ AT-MCF2000AC Power Supply Module
Installation Guide