Allied Telesis AT-MCF2000 - Manual (Page 32)

Chapter 2: Installation
32
Installing the AT-MCF2KFAN Fan Module
This procedure explains how to install the AT-MCF2KFAN
Fan Module.
Caution
The AT-MCF2000 chassis must have two power
supply modules or one power supply module and one
fan module to maintain adequate airflow and cooling
of the media converter modules.
Note
The AT-MCF2KFAN module draws its power from the
backplane of the chassis. It does not have a power
cord.
Note
The AT-MCF2KFAN module supports hot swapping.
This means you can install or replace the module
while the chassis is powered on.
To install the fan module, perform the following procedure:
1. Remove the fan module from the shipping package.
Note
Store the packaging material in a safe location. You
must use the original shipping material if you need to
return the unit to Allied Telesis.
2. Verify that the AT-MCF2KFAN shipping container
contains the following items. If an item is missing or
damaged, contact your Allied Telesis sales
representative for assistance.
ˆ One AT-MCF2KFAN Fan Module
ˆ AT-MCF2KFAN Fan Module Installation Guide