beautypg.com

Connect to a wep network – Allied Telesis AT-WNU300N User Manual

Page 21

background image

AT-WNU300N IEEE802.11b/g/n 2T2R Wireless Fast USB Adapter User Manual

21

Figure 21: Configure Auth./Encry.

4. Click on “OK”.
5. In “Profile” tab, select the profile you want to connect to, and then click on “Activate”.

Figure 22: Active an Un-secured Network

Connect to a WEP Network

Please perform the following procedure to connect to a WEP network.

1. In “Network” tab, select the AP you want to connect to, and then click on “Add to Profile”.

Figure 23: Select a Network

2. In “System Config” tab, give the profile a name to identify.