Allied Telesis AT-x510DP-52GTX - Manual (Page 16)

Chapter 1: Overview
16
Features
Here are the features of the AT-x510DP-52GTX switch:
10/100/1000
Mbps Twisted
Pair Ports
Here are the basic features of the 10/100/1000 Mbps twisted pair ports:
ˆ 48 ports per switch
ˆ 10Base-T, 100Base-TX, and 1000Base-T compliant
ˆ IEEE 802.3u Auto-Negotiation compliant
ˆ Auto-MDI/MDIX
ˆ 100 meters (328 feet) maximum operating distance
ˆ IEEE 802.3x flow control in 10/100Base-TX full-duplex mode
ˆ IEEE 802.3x backpressure in 10/100Base-TX half-duplex mode
ˆ IEEE 803.3z 1000Base-T flow control
ˆ Jumbo frames up to 13KB
ˆ RJ-45 connectors
SFP+ Slots
Here are the basic features of the four SFP+ slots on the switches:
ˆ Supports 10Gbps, 10GBase-SR/LR fiber optic transceivers
ˆ Supports 10Gbps AT-SP10TW direct connect twinax cables with
SFP+ transceiver-style connectors
ˆ Supports 1000Base-SX/LX SFP transceivers
ˆ Supports single-port BiDi 1000Base-LX SFP transceivers
ˆ Supports 1000Base-ZX SFP transceivers
Note
The SFP+ slots do not support 100Mbps 100Base-FX transceivers.
Note
SFP and SFP+ transceivers must be purchased separately. For a
list of supported transceivers, contact your Allied Telesis distributor
or reseller.
Note
SFP+ slots 51 and 52 are initially configured as stacking slots for the
VCStack feature. If you intend to use the switch as a stand-alone
unit, you must disable the VCStack feature before using the slots
with standard SFP or SFP+ transceivers. See Chapter 5,
“Configuring the Switch for Stand-alone Operations” on page 77 for
instructions.