Allied Telesis AT-x510DP-52GTX - Manual (Page 100)

Chapter 7: Cabling the Stacking Ports
100
6. Connect the fiber optic cable to the transceiver, as shown in Figure 64
on page 100. The connector on the cable should fit snugly into the
port, and the tab should lock the connector into place.
Figure 64. Connecting the Fiber Optic Cable to the Stacking Transceiver
7. Repeat this procedure if the switch is to have two stacking
transceivers.
8. Repeat this procedure on the other switches of the stack to install their
stacking transceivers. The connections must crossover such that a
transceiver in slot 1 connects to a transceiver in slot 2.
9. After you connect the stacking cables to all the switches, go to Chapter
8, “Powering On the Stack” on page 101.
S2/2
8
S1
/27
26
25
CON
SO
LE
SFP+
2691