Samsung SCH-U750HAAVZW - Manual (Page 35)

Call Functions 31
5. The contact name appears in the To: field. For more
information, refer to “Creating and Sending Picture
Messages” on page 59.
Go To
The “Go To” command allows you to access any menu or setting
screen within the phone (for example, “Go To Contacts”).
Opening Menus
To use the "Go To" voice command to access a menu or screen,
perform the following:
1. From the Home screen, press the Voice Commands key
.
2. A list of commands appears in the display and the audio
prompt “Please say a command” plays through the
earpiece or speakerphone.
3. After the beep, say “Go To” at a distance of 3-12 inches
from the microphone.
4. User can “Go To” any menu directly, but the screen name
spoken must match what displays on the menu item list,
e.g., “Go to Airplane Mode.”
Check
Checking Phone Status
Note: Checking Phone Status can be accessed with the phone flip in either the
closed or open position.
1. From the Home screen, press the Voice Commands key
.
2. A list of commands appears in the display and the audio
prompt "Please say a command" plays through the
earpiece or speakerphone.
3. After the beep, say “Check” at a distance of 3-12 inches
from the microphone. “Please choose” plays through the
earpiece or speakerphone. Valid “Check” commands are:
• "Status": Displays and announces all of the available status
indicators in sequence through the earpiece or speakerphone—if it
is enabled.
• "Voicemail" : Displays the number of new voicemail messages.
• "Messages": Displays and announces the number of new
voicemail, TXT, and Picture messages through the earpiece or
speakerphone—if it is enabled.
• "Missed Calls": Displays the missed call log.
u750.book Page 31 Sunday, April 5, 2009 8:40 PM