Samsung SCH-U750HAAVZW - Manual (Page 102)

98
Edit Codes
The default lock code is the last four digits of your phone number.
Use Edit Code to change the code to a lock code of your choice.
1. Open the flip in portrait mode and press MENU. Press
the
Directional key to highlight the
Settings &
Tools menu and press .
2. Press Phone Settings.
3. Press Security. You’re prompted to enter the lock
code. The default lock code is the last four digits of your
telephone number.
4. Enter the Lock Code and press . Several security
menus appear in the display.
5. Press Edit Codes. The following options display:
• Phone Only: Allows you to edit the lock code for only the handset.
• Calls & Services: Allows you to edit the lock code for all Calls &
Services.
6. Highlight an option and press . At the “ENTER NEW
CODE” prompt, enter the new lock code and press . At
the prompt, confirm new lock code.
7. At the “RE-ENTER NEW CODE” prompt, re-enter lock code
and press .
“PHONE ONLY CODE SET” or “CALLS & SERVICES CODE SET”
message appears in display confirming your lock code changed.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Restrictions
1. Open the flip in portrait mode and press MENU. Press
the
Directional key to highlight the
Settings &
Tools menu and press .
2. Press Phone Settings.
3. Press Security. You’re prompted to enter the lock
code. The default lock code is the last four digits of your
telephone number.
4. Enter the Lock Code and press . Several security
menus appear in the display.
5. Press Restrictions.
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
u750.book Page 98 Sunday, April 5, 2009 8:40 PM