Samsung SWD-M100ZKECLW - Manual (Page 8)

5
Initial Device Setup
If your device has never been powered on before and is
initializing for the first time, you will need to follow these
procedures. These same steps are necessary if the device is ever
Hard Reset (to factory default parameters - page 29).
1. Touch the main Windows Mobile 6.1 screen to begin the
initialization process.
2. Remove the Stylus from the side compartment (adjacent to
the Left Action key) (seen below).
3. Use your stylus to calibrate the touch accuracy of the
screen by both accurately and firmly touching the center of
each onscreen crosshair. Repeat this process for every
crosshair that appears until this step has successfully
completed.
Warning!: If your device has a touch-screen display, please note that a
touch-screen responds best to a light touch from the pad of your
finger or a non-metallic stylus. Using excessive force or a metallic
object when pressing on the touch-screen may damage the
tempered glass surface and void the warranty. For more
information, refer to “Warranty Information” on page 144.
Left Action key
Stylus
SWD-M100.book Page 5 Friday, March 5, 2010 5:49 PM