Samsung SWD-M100ZKECLW - Manual (Page 32)

29
4. Touch the Notifications tab to then assign specific audio
files (or vibrate) to play for specific applications or actions.
5. Touch the Event drop-down list and select one of the
following events:
• ActiveSync: Begin sync
• ActiveSync: End sync
• Beam: Autoreceive
• Connection disconnected
• Connection established
• Messaging: New e-mail message
• Reminders
• Wireless network detected
6. Activate any of the following notification actions by tapping
the field adjacent to each:
• Play Sound
• Repeat
• Display message on screen
• Flash light for
• Vibrate
7. Touch to save your new settings and return to the
Personal tab.
Formatting the Device’s Memory (Hard Reset)
Both the internal device storage location (Main Storage) and
microSD card (Storage Card) can be cleared of content via a Hard
Reset and reformat process.
Important!: If your Time Warner Cable device is ever Hard Reset, the
customized TWC default parameters and your ability to connect
to the Time Warner Cable WiMAX network will be lost.
After a Hard Reset, to regain your TWC functionality, see “What
do to after a Hard Reset of a Time Warner Cable Mondi device”
on page 30.
The Main Storage (My Device) location has only ~90 MB of
storage capacity to contain your installed applications and files.
Once this capacity is reached, you can obtain an error message
indicating you need to clean up the Main Storage location (you
have reached the 90 MB limit of your storage capacity and can
no longer install additional applications).
The My Storage location contains up to 3.9GB of storage capacity.
If given the option for the destination of installed applications and
files, it is recommended you use either the My Storage location
or the microSD card.
1. From the Today screen, touch Start ( ) > Settings.
2. Touch the System tab and tap Hard Reset.
• The Memory tab refers to the device’s internal memory storage.
ok
SWD-M100.book Page 29 Friday, March 5, 2010 5:49 PM