Setting the confirmation, Adaptation – Samsung SPH-M850BSASPR User Manual
Page 103
Vo
ic
e
S
e
rv
ic
e
s
91
Setting the Confirmation
Your device can be configured to take a specific action
prior to initiating any voice command parameter.
1.
Press
on the side of your device. You will hear
a prompt.
2.
From the “Say a Command” page, touch
Settings >
Confirmation
.
3.
Touch one of the available options:
Ⅲ
Automatic
to always provide you with options if
there was an issue registering the command,
confirm any commands, and then announce any
actions.
Ⅲ
Always Confirm
to always confirm any command
actions before they are done, even if it was
properly registered.
Ⅲ
Never Confirm
to never confirm any command
operations. The device will always act on what it
registers as the current command, even if it is
incorrect and without notifying you.
Adaptation
Some users with heavy accents or unusual voice
characteristics may find it difficult to achieve high
accuracy with their word recognition. The Adaptation
mode, with its Adapt Voice feature allows users to
dramatically improve the device’s accuracy by
retraining of the onboard recognition software.
(If you are satisfied with the voice recognition system's
accuracy, you don't need to use the Adaptation mode.)
After you have completed the Adaptation mode, your
device will be customized to your voice. Other people
will not be able to use your device unless they reset it
to factory defaults.
Training involves recording several number sequences
and common words to teach the system your voice.
This process takes about three minutes.
Note
ONLY use the Adaptation mode if the system is
frequently misrecognizing your speech. You can
always restore the system to its original factory
setting. See “Resetting Voice Recognition” on
page 92.
M850Dash.book Page 91 Tuesday, September 29, 2009 5:21 PM