Setting a phone password – Samsung SGH-I907ZKAATT User Manual
Page 90
Changing Your Settings 79
4.
Select the Ring type field and select the type of desired
ringer/vibration combination from the drop down menu.
• The available notification options for this type of event are: Ring,
Increasing ring, Ring once, Vibrate, Vibrate and ring, Vibrate
then ring, or None.
5.
Select the Ring tone field and select an available ringtone.
6.
Select the Play button (below the Ring tone field) to play a
sample of the currently selected ring tone. Press the Stop
button to stop the sample playback.
7.
Select
to save the new phone ringtone and type then
return to the previous screen.
Turn Phone Volume Off
You can turn the ringer off, or you can select one of the other
Ring tone options, such as Vibrate, Vibrate and ring, or Vibrate
then ring.
1.
From the Today screen, press the Start key (
) to
activate the Start menu.
2.
Select Settings (
)
Personal tab
Phone (
).
3.
Select the drop down arrow next to Ring type and select
one of the Vibrate options or select None.
4.
Select
to exit.
Screen Tap Vibration
In addition to event notifications and incoming call ringtones, you
can also set the vibration length for screen taps. The phone
defaults to On with a short vibration mode enabled, however, you
can turn this feature off, or modify the vibration length by doing
the following:
1.
From the Today screen, press the Start key (
) to
activate the Start menu.
2.
Select Settings (
)
Personal tab
Sounds &
Notifications (
)
Vibrations tab.
3.
Select the Screen taps checkbox to disable the vibration for
screen taps.
– or –
4.
Select Short, Medium, or Long to modify the length of the
screen tap vibration.
Setting a Phone Password
For more information, refer to “Locking the Phone” on page 15.
The password option allows you to enable or disable a password.
The available settings are:
• Simple PIN: This password must be at least four characters in length
and can not contain a simple sequence such as: 0000, 1111, or 1234.