Chatsworth Products Hot Aisle Containment - Manual (Page 8)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 8
BUILD TO SPEC KIT – THE AISLE CONTAINMENT DUCT
INTRODUCTION
The Build To Spec Kit from Chatsworth Products, Inc. (CPI) includes various
components that are field fabricated to create a single duct over the contained aisle.
The duct isolates and guides exhaust air from the contained aisle back to the air
handlers as part of a closed return system. The duct can be supported from the ceiling
or from the tops of cabinets. Clear polycarbonate panels allow light to enter the
contained aisle. Use Aisle Containment Door Assemblies (ordered separately) on each
end of the contained aisle. Use Full Height Blanking Panels (ordered separately) to fill
any gaps from missing cabinets or uneven rows. If cabinets vary in height, use
Universal Bulb Seal (ordered separately) on drop panels cut from extra panel material to
seal the gaps.
COMPONENTS
The basic components included with each Build To Spec Kit are illustrated below and
on the next page.
Extrusion, 94”L (2387 mm)
Use to build structure of the duct
Joiner Gusset
Use to splice Extrusion for longer duct
Plate Gusset
Use to splice corners/intersections
Inside
Containment
Outside
Containment