Chatsworth Products Hot Aisle Containment - Manual (Page 47)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 47
POSITIONING THE DOOR
Position the door frame assembly with the bottom of the side panels aligned with the floor
mounting angles. Tip the frame assembly up so that the inside pocket of the side panels fit
over the floor mounting angles. Utilize a level to ensure the door assembly is vertrically
plumb. Check plumbness at the left and right hand side panel assemblies. Tighten the
door support bracket hardware.
WARNING: Until the frame assembly is attached to the top of the cabinet,
the frame must be held up in place by at least one person.