Chatsworth Products Hot Aisle Containment - Manual (Page 12)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 12
CREATE THE DUCT
1. Assemble Extrusions to make the two long sections for the bottom of the duct.
If cabinet row length is greater than 94” (2387 mm), join extrusions together using
the Joiner Gusset and (4) Screws as shown below.
Note:
• The flat side of the extrusion faces the inside of the containment/duct (see page 8).
• The Joiner Gusset faces the outside of the containment/duct.